GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
30-3
Command Usage
GVRP defines a way for switches to exchange VLAN information in
order to register VLAN members on ports across the network. This
function should be enabled to permit automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
Example
show bridge-ext
This command shows the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Displaying Basic VLAN Information” on page 4-165 and
“Displaying Bridge Extension Capabilities” on page 4-23 for a
description of the displayed items.
Example
Console(config)#bridge-ext gvrp
Console(config)#
Console#show bridge-ext
Max support VLAN numbers: 256
Max support VLAN ID: 4093
Extended multicast filtering services: No
Static entry individual port: Yes
VLAN learning: IVL
Configurable PVID tagging: Yes
Local VLAN capable: No
Traffic classes: Enabled
Global GVRP status: Disabled
GMRP: Disabled
Console#
To Next Page
Need help?
General
