SMC Networks TigerStack II SMC8848M

4-1
C HAPTER 4
B ASIC M ANAGEMENT T ASKS
This chapter describes the basic functions required to set up management
access to the switch, display or upgrade operating software, or reset the
system.
Displaying System Information
You can easily identify the system by displaying the device name, location
and contact information.
Field Attributes
• System Name – Name assigned to the switch system.
• Object ID – MIB II object ID for switch’s network management
subsystem.
• Location – Specifies the system location.
• Contact – Administrator responsible for the system.
• System Up Time – Length of time the management agent has been up.
These additional parameters are displayed for the CLI.
• System Description – Brief description of device type.
• MAC Address – The physical layer address for this switch.
• Web Server – Shows if management access via HTTP is enabled.
• Web Server Port – Shows the TCP port number used by the web
interface.
• Web Secure Server – Shows if management access via HTTPS is
enabled.