DHCP C
OMMANDS
35-14
Default Setting
None
Command Mode
DHCP Pool Configuration
Usage Guidelines
Servers are listed in order of preference (starting with address1 as the
most preferred server).
Example
Related Commands
netbios-node-type (35-14)
netbios-node-type
This command configures the NetBIOS node type for Microsoft DHCP
clients. Use the no form to remove the NetBIOS node type.
Syntax
netbios-node-type type
no netbios-node-type
type - Specifies the NetBIOS node type:
•broadcast
• hybrid (recommended)
•mixed
• peer-to-peer
Default Setting
None
Command Mode
DHCP Pool Configuration
Console(config-dhcp)#netbios-name-server 10.1.0.33 10.1.0.34
Console(config-dhcp)#
To Next Page
Loading...
