SMC Networks TigerStack II SMC8848M

A UTHENTICATION S EQUENCE
22-5
Related Commands
enable (19-2)
authentication enable (22-7)
Authentication Sequence
Three authentication methods can be specified to authenticate users
logging into the system for management access. The commands in this
section can be used to define the authentication method and sequence.
authentication login
This command defines the login authentication method and precedence.
Use the no form to restore the default.
Syntax
authentication login {[local] [radius] [tacacs]}
no authentication login
• local - Use local password.
• radius - Use RADIUS server password.
• tacacs - Use TACACS server password.
Default Setting
Local
Command Mode
Global Configuration
Table 22-4 Authentication Sequence Commands
Command Function Mode Page
authentication
login
Defines logon authentication method and
precedence
GC 22-5
authentication
enable
Defines the authentication method and
precedence for command mode change
GC 22-7