SMC Networks TigerStack II SMC8848M

S YSTEM M ANAGEMENT C OMMANDS
20-40
show logging
This command displays the configuration settings for logging messages to
local switch memory, to an SMTP event handler, or to a remote syslog
server.
Syntax
show logging {flash | ram | sendmail | trap}
• flash - Displays settings for storing event messages in flash memory
(i.e., permanent memory).
• ram - Displays settings for storing event messages in temporary
RAM (i.e., memory flushed on power reset).
• sendmail - Displays settings for the SMTP event handler
(page 20-47).
• trap - Displays settings for the trap function.
Default Setting
None
Command Mode
Privileged Exec