MAC
-
ADDRESS
-
TABLE
AGING
-
TIME
28-5
• The maximum number of address entries is 8191.
Example
Related Commands
show ipv6 neighbors (36-43)
mac-address-table aging-time
This command sets the aging time for entries in the address table. Use the
no form to restore the default aging time.
Syntax
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-1000000 seconds; 0 to disable
aging)
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding
information.
Example
Console#show mac-address-table
Interface MAC Address VLAN Type
--------- ----------------- ---- -----------------
Eth 1/ 1 00-e0-29-94-34-de 1 Delete-on-reset
Console#
Console(config)#mac-address-table aging-time 100
Console(config)#
To Next Page
Loading...
