C
ONFIGURING
Q
UALITY
OF
S
ERVICE
P
ARAMETERS
13-3
- When the Match Class Settings page opens, specify type of traffic for
this class based on an access list, a DSCP or IP Precedence value, or
a VLAN, and click the Add button next to the field for the selected
traffic criteria. You can specify up to 16 items to match when
assigning ingress traffic to a class map.
• The class map is used with a policy map (page 13-6) to create a service
policy (page 13-10) for a specific interface that defines packet
classification, service tagging, and bandwidth policing. Note that one or
more class maps can be assigned to a policy map.
Command Attributes
Class Map
• Modify Name and Description – Configures the name and a brief
description of a class map. (Range: 1-16 characters for the name; 1-64
characters for the description)
• Edit Rules – Opens the “Match Class Settings” page for the selected
class entry. Modify the criteria used to classify ingress traffic on this page.
• Add Class – Opens the “Class Configuration” page. Enter a class name
and description on this page, and click Add to open the “Match Class
Settings” page. Enter the criteria used to classify ingress traffic on this
page.
• Remove Class – Removes the selected class.
Class Configuration
• Class Name – Name of the class map. (Range: 1-16 characters)
• Type – Only one match command is permitted per class map, so the
match-any field refers to the criteria specified by the lone match
command.
• Description – A brief description of a class map. (Range: 1-64
characters)
• Add – Adds the specified class.
• Back – Returns to previous page with making any changes.
To Next Page
Loading...
Need help?
General
