E
NTERING
C
OMMANDS
18-9
• Class Map Configuration - Creates a DiffServ class map for a specified
traffic type.
• DHCP Configuration - These commands are used to configure the
DHCP server.
• Interface Configuration - These commands modify the port
configuration such as speed-duplex and negotiation.
• Line Configuration - These commands modify the console port and
Telnet configuration, and include command such as parity and databits.
• Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.
• Policy Map Configuration - Creates a DiffServ policy map for multiple
interfaces.
• Router Configuration - These commands configure global settings for
unicast routing protocols.
• VLAN Configuration - Includes the command to create VLAN groups.
To enter the Global Configuration mode, enter the command configure
in Privileged Exec mode. The system prompt will change to
“Console(config)#” which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
To Next Page
Loading...
Need help?
General
