C
OMMAND
G
ROUPS
18-13
The access mode shown in the following tables is indicated by these
abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
DC (DHCP Server Configuration)
GC (Global Configuration)
IC (Interface Configuration)
LC (Line Configuration)
NE (Normal Exec)
MST (Multiple Spanning Tree)
Rate Limit Controls the maximum rate for traffic transmitted
or received on a port
27-1
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table,
or sets the aging time
28-1
Spanning Tree Configures Spanning Tree settings for the switch 29-1
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs and protocol VLANs
30-1
Class of Service Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight
for each priority queue, also sets priority for TCP/
UDP traffic types, IP precedence, and DSCP
31-1
Quality of Service Configures Differentiated Services 32-1
Multicast Filtering Configures IGMP multicast filtering, query
parameters, and specifies ports attached to a
multicast router
33-1
Domain Name
Service
Configures DNS services. 34-1
IP Interface Configures IP address for the switch interfaces;
also configures ARP parameters and static entries
36-1
IP Routing Configures static and dynamic unicast routing 37-1
Table 18-4 Command Group Index (Continued)
Command Group Description Page
To Next Page
Loading...
