U
SER
A
UTHENTICATION
C
OMMANDS
22-46
- Port-control – Shows the dot1x mode on a port as auto,
force-authorized, or force-unauthorized
(page 22-39).
- Supplicant – MAC address of authorized client.
- Current Identifier – The integer (0-255) used by the
Authenticator to identify the current
authentication session.
• Authenticator State Machine
- State – Current state (including initialize,
disconnected,
connecting, authenticating,
authenticated, aborting,
held,
force_authorized, force_unauthorized).
- Reauth Count – Number of times connecting state is
re-entered.
• Backend State Machine
- State – Current state (including request, response,
success, fail, timeout, idle, initialize).
- Request Count – Number of EAP Request packets sent to the
Supplicant without receiving a response.
- Identifier(Server) – Identifier carried in the most recent EAP
Success, Failure or Request packet received
from the Authentication Server.
• Reauthentication State Machine
- State – Current state (including initialize,
reauthenticate).
To Next Page
Loading...
Need help?
General
