SMC Networks TigerStack II SMC8848M

28-1
C HAPTER 28
A DDRESS T ABLE C OMMANDS
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
Table 28-1 Address Table Commands
Command Function Mode Page
mac-address-table static Maps a static address to a port in
a VLAN
GC 28-2
clear mac-address-table
dynamic
Removes any learned entries
from the forwarding database
PE 28-3
show mac-address-table Displays entries in the
bridge-forwarding database
PE 28-4
mac-address-table aging-time Sets the aging time of the address
table
GC 28-5
show mac-address-table
aging-time
Shows the aging time for the
address table
PE 28-6