SMC Networks TigerStack II SMC8848M User Manual

29-1
C HAPTER 29
S PANNING T REE C OMMANDS
This section includes commands that configure the Spanning Tree
Algorithm (STA) globally for the switch, and commands that configure
STA for the selected interface.
Table 29-1 Spanning Tree Commands
Command Function Mode Page
spanning-tree Enables the spanning tree protocol GC 29-3
spanning-tree mode Configures STP, RSTP or MSTP mode GC 29-4
spanning-tree
forward-time
Configures the spanning tree bridge
forward time
GC 29-5
spanning-tree hello-time Configures the spanning tree bridge
hello time
GC 29-6
spanning-tree max-age Configures the spanning tree bridge
maximum age
GC 29-7
spanning-tree priority Configures the spanning tree bridge
priority
GC 29-8
spanning-tree
path-cost method
Configures the path cost method for
RSTP/MSTP
GC 29-9
spanning-tree
transmission-limit
Configures the transmission limit for
RSTP/MSTP
GC 29-10
spanning-tree
mst-configuration
Changes to MSTP configuration mode GC 29-10
mst vlan Adds VLANs to a spanning tree
instance
MST 29-11
mst priority Configures the priority of a spanning
tree instance
MST 29-12
name Configures the name for the multiple
spanning tree
MST 29-13

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English