SMC Networks TigerStack II SMC8848M User Manual

N AVIGATING THE W EB B ROWSER I NTERFACE
3-9
LACP 8-11
Configuration Allows ports to dynamically join trunks 8-11
Aggregation Port Configures parameters for link aggregation
group members
8-13
Port Counters
Information
Displays statistics for LACP protocol
messages
8-17
Port Internal
Information
Displays settings and operational state for the
local side
8-18
Port Neighbors
Information
Displays settings and operational state for the
remote side
8-21
Port Broadcast Control Sets the broadcast storm threshold for each
port
8-23
Trunk Broadcast Control Sets the broadcast storm threshold for each
trunk
8-23
Mirror Port
Configuration
Sets the source and target ports for mirroring 8-25
Rate Limit 8-26
Input
Port Configuration
Sets the input rate limit for each port 8-26
Input
Trunk Configuration
Sets the input rate limit for each trunk 8-26
Output
Port Configuration
Sets the output rate limit for each port 8-26
Output
Trunk Configuration
Sets the output rate limit for each trunk 8-26
Port Statistics Lists Ethernet and RMON port statistics 8-28
Address Table 9-1
Static Addresses Displays entries for interface, address or
VLAN
9-1
Dynamic Addresses Displays or edits static entries in the Address
Table
9-3
Table 3-2 Switch Main Menu (Continued)
Menu Description Page

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English