Vista Digital Mixing System
8-52 Vista 8 Differences
SW V3.5 Date printed: 05.04.2005
[TARGET_1 SOURCE_6]
Im23 Inp m 23 In1 left=D12L AES B 1 In4L left
Im24 Inp m 24 In1 left=D12L AES B 1 In4L left
[TARGET_1 SOURCE_7]
Im23 Inp m 23 In1 left=D11R AES B 1 In3R left
Im24 Inp m 24 In1 left=D11R AES B 1 In3R left
[TARGET_1 SOURCE_4]
Im23 Inp m 23 In1 left=
Im24 Inp m 24 In1 left=
[TARGET_0 SOURCE_0]
Im23 Inp m 23 In1 left=D11R AES B 1 In3R left
Im24 Inp m 24 In1 left=D11R AES B 1 In3R left
Im25 Inp m 25 In1 left=
Im26 Inp m 26 In1 left=
Files Used to Save ProBel Set-up The system creates human-readable files (ini-file format) in the
D950System directory to save the set-up. The files are named according
to the COM port used:
File name: PortX.probel – with X being the COM port used.
Example for a .probel File
This file basically has a section for each used Source/Target combination.
The fixed labels are being used; “left” is appended for left or mono
sources/targets, and “right” is appended for right sources/targets.
To Next Page
Loading...
