Enables you to assign specific behaviour to each LED on the
indicator module. Each of the LEDs has the following options:
FUNCTION — the following options are available:
– KEYSWITCH — select a keyswitch and the position
of the key.
– DISABLED — select to disable the LED.
– SYSTEM — select the alarm type which triggers the
LED.
– AREA — select the area which triggers the LED.
– ZONE — select the zone which triggers the LED
– DOOR — select the door and the door option which
triggers the LED.
ON – COLOR — specify the activation colour
ON – FLASH — specify the behaviour of the LED in
active state. Available options are:
– Permanent — always on.
– Flash Fast\Medium\Slow — varying speed of the
flashing.
OFF – COLOR — specify the deactivation colour.
OFF – FLASH — specify the behaviour of the LED in the
inactive state. Available options are:
– Permanent — always on.
– Flash Fast\Medium\Slow — varying speed of the
flashing.
Choose one, or more, of the following deactivation options:
Calendar – select a calendar from the available options.
Keyswitch – select a keyswitch from the available
options.
Keypad - select a keypad from the available options.
Card Reader – enable or disable deactivation using a
keypad.
Select Linked or Flexible. Linked mode reduces the number
of options available in the Expander Edit menu.
To Next Page
Loading...
Need help?
General
