Vanderbilt SPC53 Series User Manual

17
Engineer programming via the browser
Configuring Communications
280
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
 Dial Up Internet: Modem 1
 Dial Up Internet: Modem 2
ATP Category
Select the category to apply to this ATP. For
information on ATP Categories, see ATP
Category Timings [➙ 363].
Advanced
Advanced ATP Settings
It is not recommended to change advanced
settings. Changes must only be made by expert
users.
Configure Advanced ATP Settings
WARNING
It is not recommended to change Advanced ATP Settings. Changes must only be
made by expert users.
1. Click the Advanced ATP Settings button.
1. Configure the fields described in the table below.
2. Click Save.
ATP Connections
Active ATP Connection
Select the ATP connection type when the
ATP is operating as the primary
communication path.
 Permanent: Stay Connected
 Temporary: Hangup 1second
 Temporary: Hangup 20 second
 Temporary: Hangup 80 second
 Temporary: Hangup 3 minutes
 Temporary: Hangup 10 minutes
 Temporary: Hangup 30 minutes
17.10.2.2.1.1

Vanderbilt SPC53 Series Specifications

General

Brand	Vanderbilt
Model	SPC53 Series
Category	Power Supply
Language	English