Xerox Phaser 790 - Page 115

10/00
2-101
Phaser 790/DocuColor 2006
007-707
Status Indicator RAPs
Initial Issue
007-707 Paper Length Mismatch RAP
Initial Actions
Ensure that the paper tray is properly loaded with paper and the side guides are in the proper
position.
Procedure
Determine which paper tray is being used when the problem occurs. Remove all the paper
from that tray and reload with fresh paper. Ensure that all the paper in the tray is of the same
size. The problem continues.
YN
Instruct the customer how to properly load the paper trays.
Select Copy mode. Select the paper Tray in which the fresh paper was loaded. The paper
size indicated on the display is the same as the paper size loaded in the paper Tray.
YN
Go to the appropriate RAP:
• 007-711 Tray 1 Paper Size Not Detected RAP
• 007-712 Tray 2 Paper Size Not Detected RAP
• 007-713 Tray 3 Paper Size Not Detected RAP
Go to 008-701 Area 2 Jam RAP.