10/00
4-140
Phaser 790/DocuColor 2006
REP 14.3
Initial Issue
Repairs and Adjustments
REP 14.3 Front Lower Cover
Parts List on PL 1.1
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Open the Tray 1 Assembly.
3. Remove the Front Lower Cover (Figure 1).
Figure 1 Removing the Front Lower Cover
Replacement
1. Insert the four hooks in the places provided on the frame (Figure 2).
2. Reinstall the Front Lower Cover in the reverse order of removal.
Figure 2 Inserting the Hooks
1
Remove the two
screws
2
Remove the Front
Lower Cover
1
Insert the hooks into
the frame
To Next Page
Loading...
