10/00
2-5
Phaser 790/DocuColor 2006
001-701
Status Indicator RAPs
Initial Issue
001-701 AC Power RAP
Initial Actions
• Ensure AC Power is available at the wall receptacle.
• Ensure the Power Cord is good. Replace the Power Cord if it is defective (PL 11.1).
Procedure
Switch off the power. Remove the Rear Cover. Switch on the power. If AC Power is not mea-
sured at J34-2 to terminal N on the Low Voltage Power Supply, replace the Low Voltage Power
Supply (PL 11.1).
To Next Page
Loading...
