Xerox Phaser 790 - Page 94

10/00
2-80
Phaser 790/DocuColor 2006
006-906/907/908/909
Initial Issue
Status Indicator RAPs
006-906/907/908/909 RAP
006-906: Control Logic detected an AOC1 error at job start or initialization.
006-907: Control Logic detected an AGC error.
006-908: Control Logic detected an OE Pixel Judgement error.
006-909: Control Logic detected an Auto Gradation correction error.
Procedure
Check the wiring and connections to the IIT Lamp (PL 16.5). If the wires are OK, replace the
Lamp. If the fault remains, replace the ICM Main PWB (PL 16.2).