11.10 H: Terminal Functions
536 YASKAWA SIEPC71061705H GA700 Series Technical Manual
Setting Value Function Description Ref.
69 External Power 24V
Supply
The terminal activates when there is an external 24V power supply between terminals PS-AC.
ON : The external 24V power supply is supplying power.
OFF : The external 24V power supply is not supplying power.
844
6A Data Logger Error
The terminal activates when the drive detects a LoG [Com Error / Abnormal SD card].
844
90 DWEZ Digital Output 1
Sets the DriveWorksEZ digital output 1. Refer to the DriveWorksEZ online manual for more information.
844
91 DWEZ Digital Output 2
Sets the DriveWorksEZ digital output 2. Refer to the DriveWorksEZ online manual for more information.
844
92 DWEZ Digital Output 3
Sets the DriveWorksEZ digital output 3. Refer to the DriveWorksEZ online manual for more information.
844
93 DWEZ Digital Output 4
Sets the DriveWorksEZ digital output 4. Refer to the DriveWorksEZ online manual for more information.
844
A0 DWEZ Extended Digital
Output 1
Sets the DriveWorksEZ digital output 1. Refer to the DriveWorksEZ online manual for more information.
844
A1 DWEZ Extended Digital
Output 2
Sets the DriveWorksEZ digital output 2. Refer to the DriveWorksEZ online manual for more information.
844
A2 DWEZ Extended Digital
Output 3
Sets the DriveWorksEZ digital output 3. Refer to the DriveWorksEZ online manual for more information.
844
A3 DWEZ Extended Digital
Output 4
Sets the DriveWorksEZ digital output 4. Refer to the DriveWorksEZ online manual for more information.
844
A4 DWEZ Extended Digital
Output 5
Sets the DriveWorksEZ digital output 5. Refer to the DriveWorksEZ online manual for more information.
844
A5 DWEZ Extended Digital
Output 6
Sets the DriveWorksEZ digital output 6. Refer to the DriveWorksEZ online manual for more information.
844
A6 DWEZ Extended Digital
Output 7
Sets the DriveWorksEZ digital output 7. Refer to the DriveWorksEZ online manual for more information.
844
A7 DWEZ Extended Digital
Output 8
Sets the DriveWorksEZ digital output 8. Refer to the DriveWorksEZ online manual for more information.
844
100 !During Run
The terminal deactivates when you input a Run command and when the drive is outputting voltage.
ON : Drive is stopping
OFF : Drive is running
844
101 !Zero Speed
The terminal deactivates when the output frequency is less than E1-09 [Minimum Output Frequency] or b2-01 [DC
Injection/Zero SpeedThreshold].
Note:
Parameter A1-02 [Control Method Selection] selects which parameter is the reference.
A1-02 Setting Description Parameter Used as the Reference
0 Open Loop V/f Control E1-09
1 V/f Control with Encoder E1-09
2 Open Loop Vector b2-01
3 Closed Loop Vector E1-09
4 Advanced OpenLoop Vector Control E1-09
5 PM Open Loop Vector Control E1-09
6 PM Advanced Open Loop Vector E1-09
7 PM Closed Loop Vector Control b2-01
8 EZ Open Loop Vector Control E1-09
ON : The output frequency is the value of E1-09 or more, or b2-01 or more.
OFF : The output frequency is less than the value of E1-09 or b2-01.
844
102 !Speed Agree 1
The terminal deactivates when the output frequency is in the range of the frequency reference ± L4-02 [Speed
Agree Detection Width].
Note:
In CLV, the motor speed is the reference.
ON : The output frequency does not align with the frequency reference although the drive is running.
OFF : The output frequency is in the range of “frequency reference ± L4-02”.
844
To Next Page
Loading...
