Chapter 6: Log Commands
100 Section II: Switch Management
FLUSH LOG OUTPUT
Syntax
flush log output[=permanent|syslog]
Parameters
permanent
Specifies the permanent log to delete its log messages.
syslog
Specifies the syslog to delete its log messages.
Description
Use this command to delete the log messages of the specified log.
Confirmation Command
“SHOW LOG” on page 106
Example
The following command deletes the log messages of both permanent log
and syslog:
manager > flush log output
The following command deletes the log messages of the syslog:
manager > flush log output=syslog
To Next Page
Loading...
