AT-GS900M Series CLI Reference
Section II: Switch Management 151
ENABLE SUMMER-TIME
Syntax
Enable summer-time
Parameters
None
Description
Use this command to enable Daylight Saving Time on the switch. When
Daylight Saving Time is enabled, the switch adjusts the local time
according to the Daylight Saving Time settings on the switch. By default,
Daylight Saving Time is disabled.
Confirmation Command
“SHOW SUMMER-TIME” on page 160
Example
The following command enables Daylight Saving Time on the switch:
Manager > enable summer-time
To Next Page
Loading...
