Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series Command Reference
Section III: Layer 2 Switching 303
Chapter 17
DHCP Snooping Commands
The DHCP Snooping commands are summarized in Table 35.
Table 35. DHCP Snooping Commands
Command Description
“ADD DHCPSNOOPING” on
page 305
Adds a static entry to the DHCP Snooping table.
“CREATE DHCPSNOOPING
MACFILTER” on page 306
Creates a MAC address filtering entry.
“DELETE DHCPSNOOPING” on
page 308
Deletes a static entry from the DHCP Snooping
table.
“DESTROY DHCPSNOOPING
MACFILTER” on page 309
Deletes MAC address filtering entries.
“DISABLE DHCPSNOOPING” on
page 310
Disables DHCP Snooping on the switch.
“DISABLE DHCPSNOOPING
ARPSECURITY” on page 311
Disables ARP security on the switch.
“DISABLE DHCPSNOOPING
LOG” on page 312
Disables the DHCP Snooping log function on
ARP security or MAC filtering.
“DISABLE DHCPSNOOPING
OPTION82” on page 313
Disables the function to handle relay agent option
82.
“ENABLE DHCPSNOOPING” on
page 314
Enables DHCP Snooping on the switch.
“ENABLE DHCPSNOOPING
ARPSECURITY” on page 316
Enables ARP security on the switch.
“ENABLE DHCPSNOOPING
LOG” on page 317
Enables the DHCP Snooping log function on
ARP security or MAC filtering.
“ENABLE DHCPSNOOPING
OPTION82” on page 318
Enables handling Relay Agent Information Option
82.
“PURGE DHCPSNOOPING” on
page 319
Disables DHCP Snooping and deletes the
settings.
“RESET DHCPSNOOPING
COUNTER” on page 320
Resets the statistics counters for DHCP
Snooping.

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English