Allied Telesis AT-GS900M Series User Manual

Chapter 19: Power Saving Commands
346 Section III: Layer 2 Switching
CREATE TRIGGER
Syntax
create trigger= trigger_id
psmode[=sleep|ledoff|portoff|poeoff] starttime=
time
[endtime= time ] [startdate= date ] [enddate= date ]
[days=
day_list ] port[= port_list |all] [name= stirng ]
[poetarget=alliedtelesis-ap|other] [state=enabled|disabled]
[test=yes|no|on|off]
Parameters
trigger_id
Specifies a power saving trigger ID. The range is 1 to 10.
psmode
Specifies the power saving mode.
sleep
The switch is turned off and in the standby mode.
ledoff
The switch turns off the led.
portoff
The switch shuts down the port.
poeoff
The switch stops supplying power to a PoE PD.
starttime
Specifies the time to start the trigger.
endtime
Specifies the time to end the trigger.
time
Specifies time in the hh:mm format.
startdate
Specifies the start date that the trigger becomes effective.
enddate
Specifies the end date that the trigger becomes effective.
date
Specifies a date in the yyy-mm-dd format.

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English