Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 195
Chapter 12
IP Management Commands
The IP management commands are summarized in Table 27.
Table 27. IP Management Commands
Command Description
“ADD IP IPADDRESS” on
page 196
Assigns an IPv4 address to the switch
and specifies whether the switch
responds to ping.
“DELETE IP” on page 198 Deletes the IPv4 address assigned from
the switch.
“DISABLE IP DHCP” on page 199 Disables the DHCP client.
“DISABLE IP REMOTEASSIGN”
on page 200
Disables the DHCP client.
“ENABLE IP DHCP” on page 201 Enables the DHCP client.
“ENABLE IP REMOTEASSIGN”
on page 202
Enables the DHCP client
“PING” on page 203 Tests the communication with the
specified IP address.
“SET IP” on page 204 Changes the IPv4 address and settings
on the switch.
“SHOW IP” on page 206 Displays the settings of IPv4 address on
the switch.

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English