Chapter 26: Policy-Based QoS Commands
468 Section IV: Security and Traffic Control
CREATE QOS TRAFFICCLASS
Syntax
create qos trafficclass=
traffic_class
[description=
string
]
[exceedaction=drop|remark]
[exceedremarkvalue=
remark_value
|none]
[markvalue=
mark_value
|none]
[maxbandwidth=
max_bandwidth
|none]
[burstsize=
burst_size
|none] [priority=
priority
|none]
[remarkpriority=yes|no|on|off|true|false]
[tos=
tos_value
|none]
[movetostopriority=yes|no|on|off|true|false]
[moveprioritytotos=yes|no|on|off|true|false]
[flowgrouplist=
flow_list
|none]
Parameters
traffic_class
Specifies a policy number. The range is 0 to 511.
string
Specifies the description of the traffic class. The description is up
to 31 alphanumeric characters. To include a space, place a double
quote (“) before and after the space.
exceedaction
Specifies an action when the bandwidth for the traffic class is
exceeded. is 0 to 63.
drop
The switch discards the packet. This is the default setting.
remark
The switch overwrites the value of the DSCP field in the IP header
with the value of the exceedremarkvalue parameter and forwards
the packet.
remark_value
Specifies a value to be written in the DSCP field of the IP header
when the bandwidth for the traffic class is exceeded. The range is
0 to 63. The default setting is none.
mark_value
Specifies a value to be written in the DSCP field of the IP header.
The range is 0 to 63. The default setting is none.
max_bandwidth
Specifies the maximum bandwidth of the traffic class in Mbps. The
range is 0 to 1016 Mbps. The default setting is none.