Allied Telesis AT-GS900M Series User Manual

Chapter 18: Power Over Ethernet (PoE) Commands
334 Section III: Layer 2 Switching
DISABLE POE PORT
Syntax
disable poe port[= port_list |all]
Parameters
port_list
Specifies a list of ports. To specify multiple ports, use a comma (,)
to separate them. To specify a range of ports, use a hyphen (-).
all
Specifies all the switch ports.
Description
Use this command to disable Power of Ethernet (PoE) on the specified
ports. By default, PoE is enabled on all ports.
Note
The PoE commands are available only for the GS908M V2-4PS
switch.
Confirmation Command
“SHOW POE” on page 342
Example
The following command disables PoE on port 1 to port 3:
Manager > disable poe port=1-3

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English