Allied Telesis AT-GS900M Series User Manual

Chapter 9: Telnet Commands
168 Section II: Switch Management
SHOW ASYN
Syntax
show asyn
Parameters
None
Description
Use this command to display the settings of the Console port.
An example of the command output is shown in Figure 26.
Figure 26. SHOW ASYN Command
Example
The following command displays the settings of the Console port:
Manager> show asyn
Serial Information
----------------------------------------
Serial port
Status .............. Enabled
Data rate ........... 9600bps
----------------------------------------

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English