Allied Telesis AT-GS900M Series - Create Qos Policy

AT-GS900M Series Command Reference
Section IV: Security and Traffic Control 465
CREATE QOS POLICY
Syntax
create qos policy= policy_number [description= string ]
[indscpoverwrite=
dscp_value |none] [remarkindscp=all|none]
[tos=
tos_value |none]
[movetostoppriority=yes|no|on|off|true|false]
[moveprioritytotos=yes|no|on|off|true|false]
[sendtomirror=yes|no|on|off|true|false]
[trafficclasslist=
traffic_class_list |none]
[redirectport=
port_number |none]
[ingressport=
port_list |all|none]
[egressport=
port_number |none]
Parameters
policy_number
Specifies a policy number. The range is 0 to 255.
string
Specifies the description of the policy. The description is up to 31
alphanumeric characters. To include a space, place a double quote
(“) before and after the space.
dscp_value
Specifies a value to be written in the DSCP field of the IP header.
The range is 0 to 63. The default setting is none.
remarkindscp
Specifies all or none to the state that the value of the
indscpoverwrite parameter overwrites the DSCP field of the IP
header. The default setting is none.
tos_value
Specifies a value for the ToS field of the IP header.
movetostoppriority
Specifies yes, no, or none to the state that the ToS value of the IP
header is used to determine the priority. The default setting is
none.
moveprioritytotos
Specifies yes, no, or none to the state that the priority is used for
the ToS value. The default setting is none.
yes, on, true
Yes to the parameter state.
no, off, false