Allied Telesis AT-GS900M Series - Destroy Qos Policy

Chapter 26: Policy-Based QoS Commands
476 Section IV: Security and Traffic Control
DESTROY QOS POLICY
Syntax
destroy qos policy= policy_list |all
Parameters
policy_list
Specifies a list of policy numbers. To specify multiple QoS policies,
use a comma (,) to separate them. To specify a range of QoS
policies, use a hyphen (-).
Description
Use this command to delete QoS policies.
Confirmation Command
“SHOW QOS POLICY” on page 494
Example
The following command deletes QoS policy 1:
Manager > destroy qos policy=1