AT-GS900M Series CLI Reference
Section I: Getting Started 77
DELETE FILE
Syntax
delete file=
file_name
Parameter
filename
Specifies the file name of a file to delete from the switch. You can
also specify a file name using one wild card (*). The wild card (*)
must be at the beginning or end of the file name.
Description
Use this command to delete a file from the switch.
Confirmation Command
“SHOW FILE” on page 86
Example
The following command deletes the management software image file
gs900mv2_v232.rel
:
Manager > delete file=gs900mv2_v232.rel
The following command deletes all the files with the .scp extension:
Manager > delete file=*.scp
To Next Page
Loading...
