Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series Command Reference
Section IV: Security and Traffic Control 483
SET QOS FLOWGROUP
Syntax
set qos flowgroup= flow_group_number [description= string ]
[markvalue=
mark_value |none] [priority= priority |none]
[remarkpriority=yes|no|on|off|true|false]
[tos=
tos_value |none]
[movetostoppriority=yes|no|on|off|true|false]
[moveprioritytotos=yes|no|on|off|true|false]
[classifierlist=
classifier_list |none]
Parameters
flow_group_number
Specifies a flow group number.
string
Specifies the description of the flow group. The description is up to
31 alphanumeric characters. To include a space, place a double
quote (“) before and after the space.
mark_value
Specifies a value to be written in the DSCP field of the IP header.
The range is 0 to 63. This value has a priority over the markvalue
of the traffic class and the indscpoverwrite of the policy.
priority
Specifies a priority. The range is 0 to 7. The default setting is none.
remarkpriority
Specifies yes, no, or none to the state that the priority of the flow
group overwrites the user priority in the packet.
yes, on, true
Specifies yes to the parameter state.
no, off, false
Specifies no to the parameter state.
tos_value
Specifies a value for the ToS field of the IP header.
movetostoppriority
Specifies yes, no, or none to the state that the ToS value of the IP
header is used to determine the priority.
moveprioritytotos
Specifies yes, no, or none to the state that the priority is used for
the ToS value.

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English