Allied Telesis AT-GS900M Series User Manual

Chapter 21: Multiple Spanning Tree Protocol (MSTP) Commands
382 Section III: Layer 2 Switching
DESTROY MSTP MSTI
Syntax
disable mstp msti= instance
Parameters
instance
Specifies a MST instance ID. The range is 1 to 15.
Description
Use this command to delete a MST instance. The MSTP instance
associated with a VLAN cannot be deleted. To delete a MSTP instance,
release the VLAN from the MSTP instance using the DELETE MSTP
MSTI VLAN command before using the DESTROY MSTP MSTI
command.
Confirmation Command
“SHOW MSTP” on page 399
Examples
The following command deletes the MSTP instance 1:
destroy mstp msti=1

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English