Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series Command Reference
Section IV: Security and Traffic Control 487
SET QOS TRAFFICCLASS
Syntax
set qos trafficclass= traffic_class [description= string ]
[exceedaction=drop|remark]
[exceedremarkvalue=
remark_value |none]
[markvalue=
mark_value |none]
[maxbandwidth=
max_bandwidth |none]
[burstsize=
burst_size |none] [priority= priority |none]
[remarkpriority=yes|no|on|off|true|false]
[tos=
tos_value |none]
[movetostopriority=yes|no|on|off|true|false]
[moveprioritytotos=yes|no|on|off|true|false]
[flowgrouplist=
flow_list |none]
Parameters
traffic_class
Specifies a policy number.
string
Specifies the description of the traffic class. The description is up to
31 alphanumeric characters. To include a space, place a double
quote (“) before and after the space.
exceedaction
Specifies an action when the bandwidth for the traffic class is
exceeded. is 0 to 63.
drop
The switch discards the packet.
remark
The switch overwrites the value of the DSCP field in the IP header
with the value of the exceedremarkvalue parameter and forwards
the packet.
remark_value
Specifies a value to be written in the DSCP field of the IP header
when the bandwidth for the traffic class is exceeded. The range is
0 to 63.
mark_value
Specifies a value to be written in the DSCP field of the IP header.
The range is 0 to 63.
max_bandwidth
Specifies the maximum bandwidth of the traffic class in Mbps. The
range is 0 to 1016 Mbps.

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English