Allied Telesis AT-GS900M Series - Show Mstp Debug Msti

Chapter 21: Multiple Spanning Tree Protocol (MSTP) Commands
402 Section III: Layer 2 Switching
SHOW MSTP DEBUG MSTI
Syntax
show mstp debug msti=cist| instance |all]
Parameters
msti
Specifies the MST instance to display the MSTP debug options.
cist
Displays the debug options on CIST.
instance
Specifies the MST instance ID to displays the debug options.
all
Displays the debug options on all the MST instances.
Description
Use this command to display the debug options on the specified MST
instance. See Figure 61 for an example.
Figure 61. SHOW MSTP DEBUG MSTI Command
Examples
The following command displays the debug options on CIST:
show mstp debug msti=cist
Manager > show mstp debug msti=cist
MSTP Instance Port Debug Modes Output Timeout
State Machine Debug Modes
-----------------------------------------------------------------------
CIST 1 STATE Asyn 0 (16) None
PTX
2 STATE Asyn 0 (16) None
PTX
3 STATE Asyn 0 (16) None
PTX
4 STATE Asyn 0 (16) None
PTX
5 STATE Asyn 0 (16) None
PTX
...