Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 237
DISABLE SWITCH STORMDETECTION
Syntax
disable switch stormdetection port= port_list |all
Parameters
port_list
Specifies a list of ports. To specify multiple ports, use a comma (,)
to separate them. To specify a range of ports, use a hyphen (-).
all
Specifies all the switch ports.
Description
Use this command to disable detecting the receiving rate. By default,
detecting the receiving rate is disabled.
Confirmation Command
“SHOW SWITCH STORMDETECTION” on page 276
Example
The following command disables detecting the receiving rate:
Manager > disable switch stormdetection port=2

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English