Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series CLI Reference
Section I: Getting Started 89
SHOW LOADER
Syntax
show loader
Parameters
None
Description
Use this command to display the information about the loader. The
settings are used for the LOAD and UPLOAD commands. An example is
shown in Figure 10.
Figure 10. SHOW LOADER Command
Example
This example displays the status of the loader:
Manager > show loader
Loader Information
--------------------------------------
Defaults:
Method ............. tftp
File ............... -
Destination File ... -
Server ............. 192.168.1.1
--------------------------------------

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English