AT-GS900M Series CLI Reference
Section IV: Security and Traffic Control 503
DISABLE PORTAUTH PORT LOGTYPE
Syntax
disable portauth[=all|8021x|macbased|webbased]
port=
port_list
|all logtype=success|failure|logoff|all
Parameters
portauth
Specifies an authentication method.
all
Specifies all the authentication methods.
8021x
Specifies 802.1x Port-Based Authentication using EAP.
macbased
Specifies MAC-Based Authentication.
webbased
Specifies Web-based Authentication.
port_list
Specifies a list of ports. To specify multiple ports, use a comma (,)
to separate them. To specify a range of ports, use a hyphen (-).
logtype
Specifies a log type.
success
Specifies the log type of authentication success.
failure
Specifies the log type of authentication failure.
logoff
Specifies the log type of logoff.
all
Specifies all log types.
Description
Use this command to disable logging on the specified authentication
option and port. By default, all log types are enabled.
To Next Page
Loading...
Need help?
General
