Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series CLI Reference
Section IV: Security and Traffic Control 497
Chapter 27
Port-Based Authentication Commands
The Port-Based Authentication commands are summarized in Table 56.
Table 56. Port-Based Authentication Commands
Command Description
“ADD PORTAUTH PORT
SUPPLICANTMAC” on
page 499
Adds the MAC address of the supplicant
that communicates through the supplicant
port.
“DELETE PORTAUTH PORT
SUPPLICANTMAC” on
page 501
Deletes the MAC address of the
supplicant specified on the port.
“DISABLE PORTAUTH” on
page 502
Disables Port-based Authentication on the
switch.
“DISABLE PORTAUTH PORT
LOGTYPE” on page 503
Disables logging on the specified
authentication option and port.
“DISABLE WEBAUTHSERVER”
on page 505
Disables the Web-based Authentication
function.
“ENABLE PORTAUTH” on
page 506
Enables Port-based Authentication on the
switch.
“ENABLE PORTAUTH PORT
LOGTYPE” on page 507
Enables logging on the specified
authentication option and port.
“ENABLE WEBAUTHSERVER”
on page 509
Enables the Web-based Authentication
function.
“SET PORTAUTH
AUTHMETHOD” on page 510
Specifies the authentication protocol to
RADIUS EAP.
“SET PORTAUTH
CSIDFORMAT” on page 511
Specifies the MAC address format for
RADIUS packets.
“SET PORTAUTH
DHCPSERVER” on page 513
Enables or disables the DHCP server
function for Authentication and specify the
lease time of an IP address.
“SET PORTAUTH PORT
(Authenticator Port for All
Methods)” on page 514
Changes the authenticator settings for all
authentication methods including 802.1x
Port-based, MAC address-based, and
Web-based authentication on the
specified port.

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English