Allied Telesis AT-GS900M Series User Manual

Chapter 27: Port-Based Authentication Commands
498 Section IV: Security and Traffic Control
“SET PORTAUTH PORT
(802.1X Authenticator Port)” on
page 518
Changes the authenticator port settings
for 802.1x authentication method on the
specified port.
“SET PORTAUTH PORT
(802.1X Supplicant Port)” on
page 522
Changes the supplicant port settings for
on the specified port.
“SET PORTAUTH PORT
(Authenticator Port for MAC and
Web)” on page 524
Changes the authenticator port settings
for MAC address-based and Web-based
authentication on the specified port.
“SET PORTAUTH PORT
(Canceling the Authentication
Type)” on page 527
Cancels the port as an authenticator or
supplicant.
“SET PORTAUTH PORT
SUPPLICANTMAC” on
page 528
Adds the MAC address of the supplicant
that communicates through the supplicant
port.
“SET PORTAUTH
USERIDFORMAT” on page 529
Specifies the MAC address format for
RADIUS packets for Web-Based
Authentication.
“SET WEBAUTHSERVER” on
page 531
Changes the TCP port for the Web-based
authentication server, specifies the URL
that the user is redirected after
authenticated, and specifies messages to
display on the Web-based authentication
login screen.
“SHOW PORTAUTH” on
page 532
Displays information about Port-Based
Authentication.
“SHOW PORTAUTH PORT
AUTHENTICATOR” on page 534
Displays authenticator information about
Port-based Authentication on the
specified port.
“SHOW PORTAUTH PORT
SUPPLICANT” on page 536
Displays supplicant information about
Port-based Authentication on the
specified port.
“SHOW WEBAUTHSERVER” on
page 538
Displays information about Web-based
Authentication.
Table 56. Port-Based Authentication Commands (Continued)
Command Description

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English