Allied Telesis AT-GS900M Series - Destroy Dhcpsnooping Macfilter

AT-GS900M Series Command Reference
Section III: Layer 2 Switching 309
DESTROY DHCPSNOOPING MACFILTER
Syntax
destroy dhcpsnooping macfilter= entry_id_list |all
Parameters
entry_id_list
Specifies a list of client entries. To specify multiple entries, use a
comma (,) to separate them. To specify a range of entries, use a
hyphen (-).
all
Specifies all client entries.
Description
Use this command to delete MAC address filtering entries.
Confirmation Command
“SHOW DHCPSNOOPING MACFILTER” on page 331
Example
The following command delete the client entry IDs 2, 3, and 4:
Manager > destroy dhcpsnooping macfilter=2,3,4