Allied Telesis AT-GS900M Series User Manual

Chapter 21: Multiple Spanning Tree Protocol (MSTP) Commands
390 Section III: Layer 2 Switching
RESET MSTP COUNTER PORT
Syntax
reset mstp counter port[= port_list |all]
Parameters
port
Specifies one or more ports that MSTP counters are reset on.
port_list
Specifies a list of ports. To specify multiple ports, use a comma (,)
to separate them. To specify a range of ports, use a hyphen (-).
all
Specifies all the switch ports.
Description
Use this command to clear MSTP counters on the specified port.
Confirmation Command
“SHOW MSTP COUNTER PORT” on page 401
Examples
The following command clears MSTP counters on ports 5 and 6:
reset mstp counter port=5-6

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English