Allied Telesis AT-GS900M Series User Manual

Chapter 5: Basic Operations Commands
88 Section I: Getting Started
SHOW FTP
Syntax
show ftp
Parameters
None
Description
Use this command to display the information about the FTP server. An
example is shown in Figure 9.
Figure 9. SHOW FTP Command
The fields are described in Table 8 .
Example
This example displays the status of the FTP server:
Manager > show ftp
Table 8. SHOW FTP Command
Field Description
FTP server Displays the FTP server is enabled or disabled.
FTP server
Listen port
Displays the TCP port for FTP control.
FTP Module Configuration:
--------------------------------------
FTP Server : Enabled
FTP Server Listen Port : 21
--------------------------------------

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English