Allied Telesis AT-GS900M Series - Reset Qos Policy Counter

AT-GS900M Series Command Reference
Section IV: Security and Traffic Control 479
RESET QOS POLICY COUNTER
Syntax
reset qos policy[= policy_list |all] counter
Parameters
policy_list
Specifies a list of policy numbers. To specify multiple QoS policies,
use a comma (,) to separate them. To specify a range of QoS
policies, use a hyphen (-).
Description
Use this command to clear the counters of the flow groups assigned to the
QoS policies.
Confirmation Command
“SHOW QOS POLICY COUNTER” on page 495
Example
The following command clears the counters of the flow groups assigned to
QoS policy 1:
Manager > reset qos policy=1 counter