Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series CLI Reference
Section II: Switch Management 125
ENABLE INTERFACE LINKTRAP
Syntax
enable interface= if_index | interface |all linktrap
Parameters
if_index
Specifies a port number.
ifterface
Specifies a port interface name. The port interface name is a prefix
of port followed by a port number, such as port1, port2 and port16.
all
Specifies all port interfaces.
Description
Use this command to enable generating SNMP traps when the link is up or
down at the specified port interface. By default, generating SNMP traps is
disabled when the link is up or down at port interfaces.
Confirmation Command
“SHOW INTERFACE” on page 134
Example
The following command enables generating traps when the link is up or
down at port1:
Manager > enable interface=port1 linktrap

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English