Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series CLI Reference
Section II: Switch Management 131
Note
To create a new community, use the CREATE SNMP COMMUNITY
command. See “CREATE SNMP COMMUNITY” on page 115. To
change the settings of the traphost, manager, and trap parameters,
see “ADD SNMP COMMUNITY” on page 113.
Confirmation Command
“SHOW SNMP COMMUNITY” on page 140
Example
The following command changes the community private with the read
access:
Manager > set snmp community=private access=read

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English