Chapter 9: Telnet Commands
170 Section II: Switch Management
Example
The following command displays the settings of the Console port, Telnet,
and sessions from the console port and Telnet:
Manager> show console
Page size Displays the number of lines displayed at a time in
the screen.
Timeout Displays the time in seconds that the session ends
after no commands are entered.
Completion Displays the way that commands are expanded at
the prompt. The options are:
Tab and Space
Tab only
Space only
Off
Serial Port Displays the information about the Console port.
Status Displays whether logging in from the Console port
is Enabled or Disabled.
Date rate Displays the date rate from the Console port. It
always shows 9600bps.
Telnet Displays the information about Telnet.
Status Displays whether logging in form Telnet is Enabled
or Disabled.
TCP port Displays the TCP port for the Telnet server.
Connection Limit Displays the maximum number of Telnet sessions
allowed.
Table 21. SHOW CONSOLE Command (Continued)
Field Description
To Next Page
Loading...
Need help?
General
