Chapter 21: Multiple Spanning Tree Protocol (MSTP) Commands
378 Section III: Layer 2 Switching
“SET MSTP MSTI” on page 397 Specifies the bridge priority to the specified
MST instance.
“SET MSTP MSTI PORT” on
page 398
Specifies the port priority for an MST
instance.
“SHOW MSTP” on page 399 Displays the settings and state of MSTP and
CIST.
“SHOW MSTP COUNTER
PORT” on page 401
Displays the MST counters on the specified
ports.
“SHOW MSTP DEBUG MSTI”
on page 402
Displays the debug options on the specified
MST instance.
Table 44. Multiple Spanning Tree Protocol Commands (Continued)
Command Description
To Next Page
Loading...
