AT-GS900M Series CLI Reference
Section IV: Security and Traffic Control 407
all
Specifies all the switch ports.
Description
Use this command to create an access filter entry. The switch can have up
to 512 entires.
Confirmation Command
“SHOW ACCESS FILTER” on page 415
Example
The following command adds an access filter to deny Telnet on all the
ports from the 192.168.1.2 device:
Manager > add access filter=telnet ipaddress=192.168.1.2
mask=255.255.255.255 action discard port=all
To Next Page
Loading...
